NaviPac POSMV IF module : EIVA Support

NaviPac POSMV IF module Print

Modified on: Tue, 23 Aug, 2022 at 1:56 PM

I want to interface a vessel owned POSMV system in NaviPac to provide position, heading and motion.

The string is received via UDP.

The POSMV GPS driver decodes it fine.

However neither the gyro or motion POSMV decoders work. Although when viewing the data in Raw Data viewer and selecting these decoders it does..

When interfacing a POSMV into NaviPac, you normally use the NaviPac POSMV IF (Interface) driver (POSMVIF.exe).

You could create a desktop short cut for it from C:/EIVA/NaviPac/Bin/POSMVIF.exe and start it from there.

This manual guides you through the POSMV Interface module:

Did you find it helpful? Yes No

NaviPac POSMV IF module Print