The data sources available for display can be toggled on and off from the menu that appears when right-clicking in the panel. The available data sources, given in sequence, are:
- 2D Flap Angle Port: Displays the flap angles for port flap
- 2D Flap Angle Stbd: Displays the flap angles for starboard flap
- 2D Flap Command Port: Displays the command angle sent to the port flap
- 2D Flap Command Stbd: Displays the command angle sent to the starboard flap
- 3D Flap Angle Port: Displays the flap angles for port 3D flap
- 3D Flap Angle Stbd: Displays the flap angles for starboard 3D flap
- Altimeter: Displays the altitude of the ScanFish / ViperFish
- Battery Voltage: Displays the ADC of the ScanFish / ViperFish
- Cable Counter Speed: Displays the speed in m/s of the winch cable
- Cable Counter Value: Displays the catenary length of winch cable
- Controller Temperature: Displays the hardware temperature in the controller
- Distance Off Line: Displays the cross track error in metres
- Heading: Displays the ScanFish / ViperFish heading
- Pitch: Displays the ScanFish / ViperFish pitch
- Roll: Displays the ScanFish / ViperFish roll
- Water Depth: Displays the depth of the ScanFish / ViperFish
The Data Chart panel allows the user to dump the present Data Chart charts to a PDF file. Similarly, the data from the Data Chart can be exported to a CSV file that allows for further analysis of the data in other software environments, such as spreadsheets. These features are available when right-clicking in the Data Chart panel.