NaviSuite Kuda Core
When you open NaviSuite Kuda Core Config for the first time, the EIVA Licence Activator opens automatically. If it does not, you can open it manually from t...
Tue, 16 Jun, 2026 at 2:20 PM
No. Only one NaviSuite Kuda Core licence is required for a remote operation. The licence is installed and activated on the vehicle (USV or onboard) comput...
Tue, 16 Jun, 2026 at 2:20 PM
In NaviSuite Kuda Core Config you can add a sensor in several ways: Right-click the vessel in the Vehicle tree and select Add instrument. Right-click ins...
Tue, 16 Jun, 2026 at 2:20 PM
Q: I want to set Soundvelocity reference and have alarm shown in Helmsman when Soundvelocity changes more than error limit set in the project. How do I do t...
Tue, 4 Feb, 2025 at 4:08 PM
NaviSuite Kuda Core lets you control a multibeam echo sounder (for example an R2Sonic) directly, so you can adjust the sonar during acquisition without leav...
Tue, 16 Jun, 2026 at 2:38 PM
No. Do not install the NaviSuite Kuda Core bundle on a computer that already has NaviPac or NaviScan installed. Uninstall NaviPac and NaviScan before inst...
Tue, 16 Jun, 2026 at 2:21 PM
NaviSuite Kuda Core writes crash logs and diagnostic information to a dedicated folder on the local computer. Location C:\ProgramData\EIVA\Kuda Core\Diagn...
Tue, 16 Jun, 2026 at 2:30 PM
If the supervisor temporarily freezes when uploading waypoints or runlines, remove obsolete data from both computers: On the USV, remove the files from th...
Tue, 16 Jun, 2026 at 2:22 PM
The following EIVA services should be running: EIVA Master Service EIVA Remote Service EIVA Time Service If Kuda Core is not behaving as expected, che...
Tue, 16 Jun, 2026 at 2:23 PM
NaviSuite Kuda Core logs your survey data through NaviScan, into SBD files. The logging toolbar Once acquisition is running and NaviScan is connected, the...
Tue, 16 Jun, 2026 at 2:43 PM