NaviPac 4

Error message ‘Can’t open object file:…’ on startup
Q: When starting NaviPac 4.5. the error message 'Can’t open object file:…' pops up. How can this be avoided? A: Please perform a NaviPac co...
Wed, 27 Jan, 2021 at 11:18 AM
GPS tide calculation
Q: How does NaviPac calculate the GPS tide eg also applying a reduction file?  A: See the steps below for calculating the GPS Tide in NaviPac: RAW ...
Fri, 9 Apr, 2021 at 3:09 PM
NaviPac PHINS/ROVINS module
Q:  How do I configure the NaviPac PHINS/ROVINS Aiding driver?   A: If NaviPac should use the special PHINS/ROVINS Aiding driver, the module below will ...
Tue, 4 Mar, 2025 at 1:39 PM
Dragged offset driver
Q: How can I setup a dragged offset in NaviPac? A: The dragged offset driver can be used for: 2D Positioning, if used without the compensate for depth...
Tue, 28 Feb, 2023 at 2:49 PM
Understanding transponder naming in NaviPac
Q: Understanding transponder naming in NaviPac 4. How do I set the TP transponder names so that NaviPac 4 understands them? A: Here same examples: For t...
Tue, 4 Mar, 2025 at 2:21 PM
How is the depth being calculated in NaviPac
Q: How is the depth being calculated in NaviPac? What are the formulas used? A: NaviPac is calculating the depth by using two methods. The methods are d...
Fri, 14 Jun, 2024 at 9:54 AM
Use same port for GPS and Gyro data in NaviPac
Q: I receive both GPS and Gyro data strings on the same com port, can I use the same port to receive the data in NaviPac for the both drivers? A: Yes, y...
Mon, 5 Feb, 2024 at 2:38 PM
Distribution is not working in NaviPac 4 Helmsman's Display
Q: Runlines, waypoints and shapes are not distributing from Master Helmsman's Display to the Remotes, what can I do? A: In case NaviPac doesn't ...
Thu, 3 Oct, 2024 at 4:23 PM
Kongsberg DP Waypoints in NaviPac 4
Q: How can I send Kongsberg DP Waypoints to my Kongsberg system in NaviPac 4? A: In NaviPac 4 the Kongsberg DP Waypoints can be sent as described below:...
Fri, 4 Oct, 2024 at 2:43 PM
How can I setup a user defined remote relative position driver in NaviPac?
Q: How can I setup a user defined remote relative position driver in NaviPac? A: In NaviPac a new vehicle needs to be created as a vessel type where the us...
Fri, 31 Jan, 2025 at 11:03 AM